Low-dust Hawk Performance Ceramic brake pads are included with
every brake kit.
This pad material provides excellent cold "bite", near-race
maximum tamp range, and extremely low dust operation.
(click here for more info on Hawk Performance Ceramic pads)
Race pads may be substituted for the difference in cost.
UUC stocks Alcon fitments in these compounds:
| COMPOUND |
USE
|
DESCRIPTION |
| DTC-70 |
RACE
|
Extremely high torque with aggressive
controllable initial bite. Superior release and torque control
characteristics. Brake pads designed for cars with high
deceleration rates with or without down force. Recommended
to be used as a front pad with DTC-60 rear. |
| DTC-60 |
RACE
|
High torque with less initial bite than DTC 70.
Superior release and torque control characteristics. Brake pads
designed for cars with high deceleration rates with or without
down force. Recommended for use with DTC-70 when split friction
between front and rear axle is desired. |
| Performance Ceramic |
STREET/
AUTO-X
|
Ultimate stopping power in an ultra-low dust, low
noise ceramic compound!
Performance Ceramic is engineered to reduce brake NVH (Noise,
Vibration and Harshness), creating a quieter performing brake
pad. Furthermore, the ceramic brake pad formula has a linear
friction profile that allows your ABS brake system to work more
effectively. With Performance Ceramic you can expect reduced
brake pad wear, lower dust output levels and a rotor-friendly
brake pad. |
PAD SHAPES:
|
As used in:
|
| Hawk Part # |
PFC Part # |
Wilwood # |
Ferodo Part # |
| HB 105.630 |
7700**16.4 |
9216 |
FRP1077 |
|
|
|
As used in all Alcon 6-piston front calipers:
|
 |
|
|
As used in Mega4-piston front calipers for E60 5-series/M5 and
E90/E92:
|
| Hawk Part # |
PFC Part # |
Ferodo Part # |
| HB 105.620 |
594**18.4 |
FRP3042 |
|
|