UUC/Alcon brake kits for all 1992-2006 3-series/Z3 and 1994-1999 M3/MZ3 updated with UUC T-DRIVE™ Rotors (floating 2-piece), new 330mm x 32mm size.  Kits can still use optional 1-piece E46 M3 325mm x 28mm rotors with shim adjustment.

For UUC/Alcon kits shipped prior to 9/3/2010, UUC T-DRIVE™ Rotors are available in 325mm x 28mm size.

Designed around race-proven T-Drive dynamic mount hardware as used in ALMS, Grand Am, NASCAR, and virtually all other professional racing series, the UUC T-Drive floating rotors bring professional race performance to OE-replacement fitments.
[ CLICK HERE ] for more details

UUC/Wilwood brake kits for all 1992-2006 3-series/Z3 and 1994-1999 M3/MZ3 updated with UUC T-DRIVE™ Rotors (floating 2-piece).

Designed around race-proven T-Drive dynamic mount hardware as used in ALMS, Grand Am, NASCAR, and virtually all other professional racing series, the UUC T-Drive floating rotors bring professional race performance to OE-replacement fitments.

Purpose-built rotor for these kits has minimal unswept area, maximum aluminum hat area for lightest weight possible.
[ CLICK HERE ] for more details

UUC T-DRIVE™ Rotors (floating 2-piece) for E46 M3, replaces original front rotors.

Designed around race-proven T-Drive dynamic mount hardware as used in ALMS, Grand Am, NASCAR, and virtually all other professional racing series, the UUC T-Drive floating rotors bring professional race performance to OE-replacement fitments.

This part is a direct replacement for original equipment E46 M3 rotors and works with original BMW calipers .

These rotors will also work with UUC/Alcon big brake kits for applications originally using a 325mm x 28mm rotor.

A true "floating" rotor design allows the disk portion to expand radially with heat, seperate from the cooler mounting hat.  This reduces stress-induced deformation of the disk due to differences in temperature between disk and hat.  The net result is more effective braking and longer lifespan of pad and rotor components.

New center-adjust rear swaybar links now shipping with all UUC swaybar sets for E36 and E46.

Also available seperately, can be used with E36/E46 swaybars made by any of these manufacturers:
UUC
H&R
Eibach
Dinan
Hotchkis
Suspension Techniques


The TyreGuardian™ Puncture Protection System prevents the most common automobile disabler - a tire puncture. A concentrated, latex-based liquid, TyreGuardian™ is easily installed in minutes.  Once installed, your tires are protected against tire punctures in the tread area for the life of the tire!  This level of protection eliminates the dangers of changing a tire at the side of busy highways and eliminates the waiting inherent in roadside assistance plans.






advanced Flow engineering intake systems for most 1992 and newer BMWs are "Engineered to Exceed".

100% made in USA (just the way we like it!) with their advanced 6-layer filter technology, these aFe systems are built specifically for the models listed and deliver optimum results without any "check engine" lights or other problems.

click here for more info

E90/E92/E93 M3 / 335 / 330 / 328 / 325 / 323
Stainless steel brake line set

D.O.T. COMPLIANT

Original brake lines are rubber and can expand under the normal pressure of use.  This expansion of the brake line negatively affects the brake caliper piston travel, and makes for mushy pedal feedback.

UUC's Stainless Steel Brake lines are used to "performance tune" your braking system.  

Inner Teflon® line is covered with woven stainless steel braid that will not expand under pressure.  The advantages include better brake pedal feedback and a firmer pedal, along with superior brake modulation.  Results will be immediate.


click here for more info
E30 M3 / 325 / 318
SwayBarbarian™ Anti-Roll Bar set
Spec E30™ legal

Created, designed, and manufactured by the leaders in aftermarket upgrades for BMW, the E30 SwayBarbarian delivers superior quality and the ultimate in sway bar performance.

Provided in a 22mm front / 19mm rear combination with Aurora Bearing link components, urethane bushings, and bracket reinforcement, the E30 SwayBarbarian is optimized for use in NASA Spec E30 and BMW CCA Club Racing. It is also a great product for installation in a standard street car format for enhanced handling and perThe TyreGuardian™ Puncture Protection System prevents the most common automobile disabler - a tire puncture. A concentrated, latex-based liquid, TyreGuardian™ is easily installed in minutes.  Once installed, your tires are protected against tire punctures in the tread area for the life of the tire!  This level of protection eliminates the dangers of changing a tire at the side of busy highways and eliminates the waiting inherent in roadside assistance plans.formance.


click here for more info
WHEEL SPACERS
starting at $59.95
for BMW only: 5X120, 72.6mm bore (all 5-bolt except E39 and X5)

Available in 5mm, 12mm, and 20mm thickness.

Our premium wheel spacers have the high-tech BMW-specific features not found in generic or economy spacers:

* Correct 73.6mm hubcentric center bore for perfect fit.
* Built-in hub extender on 12mm and 20mm sizes.
* Fully chamfered/stress-relieved transitions on all planar changes for maximum strength.
* Clearly engraved with size.

click here for more info
BACK IN STOCK - NEW DESIGN!  Metric Tape Measure

The perfect gift for the European car owner!  Now, even longer: 7.5m, 25 feet

click here for more info
E87 swaybars 1-series swaybars now shipping!
Available for all 135i, 128i, and Euro-spec 130i, 120i, 120d, 118i, 118d

[ CLICK HERE ] for more info or to order!

Schroth's Competition Harnesses are the best you can get. They are the choice of winning teams in every professional race series as well as the safety conscious club racer. Schroth's competition line also has stuff for the weekend driving enthusiast who's serious about turning their car into a track toy.

[ CLICK HERE ] for more info or to order!

Alcon is a name synonymous with the manufacture and supply of high specification brakes and clutches for motorsport and high performance road vehicles.

In the world of motorsport, Alcon a Technical Partner to the Honda F1 Racing Team, supplying brake calipers of a patented design; while co-operating with a number of other teams to develop the next generation of F1 braking systems. Alcon also provided all the brake hardware to support Citroën’s dominance of the World Rally Championship [WRC] in recent years.

In the US, the 2003, 2004, and 2005 IRL titles have all been won using Alcon brakes, and Alcon product is specified as mandatory for the hard-braking road course races. In the world of NASCAR, Alcon counts Penske, Hendrick Motorsport and Ray Evernham Motorsport amongst their front-running customers; while a new partnership with friction manufacturer, Raybestos in 2006, is making the use of Alcon designed and manufactured brake components still more widespread in the top stock car series.

UUC is proud to announce our new line of Alcon-based Ultimate Brake Kits!

The design of these kits allows for scalable rotor use. Primarily, UUC specs the kits to use genuine BMW Motorsport rotors as provided with the European version of the M3 or the M3 CSL which feature a true radial floating mechanism for free thermal expansion of the disk unhindered by the center hat. The system is scalable in that oversized and thicker rotors will be available for future use.

[ click here for more details ]
D-FORCE wheels

New "EmPower" design!

The perfect track or street wheel for fitting wide rubber under your car. At just over 18 lbs for 18", you'll have a hard time finding a better performance wheel for the money. Flow-formed for superior strength, and fully tested for impact and crack resistance. Available in two sizes, and two finishes; silver or anthracite with machined lip. BMW roundel center caps are also available.

Available for 1992-2008 3-series and M3.

[ click here for more details and pics ]
The ultimate front control arm bushings (FCAB)
E46
1999-2005		 M3, M3 CSL, 330, 328, 325, 323, 318
E36
1992-1999		 M3, 328, 325, 323, 323, 318 
(not for '95 M3 with offset bushings)
E30
1984-1991		 M3, 325, 323, 320, 318, 316
Z3 MZ3, 3.0, 2.8, 2.5, 1.9, 1.8

Limited Lifetime Warranty
including race use

Replacement hybrid design front control arm bushings use a true rotational bearing built into a high-durometer bushing material. The net result is racecar functionality with near-OE levels of vibration and noise damping. 

[ CLICK HERE ] for more info or to order!

The all-new TSE3 "Light" is an affordable rear section exhaust for '00-'05 330, 328, 325 and 323 models (i, Ci, iT, Xi, CiC), giving a very sporting yet subdued sound. Guaranteed absolutely no cabin "drone", this exhaust is the perfect upgrade for the enthusiast driver that wants "a little more" without going for the full TSE3 cat-back.

[ CLICK HERE ] for more info or to order!
D-FORCE wheels

Just to be clear - this is not a wheel manufactured by BMW.  BMW and the brand "D-Force" have no connection.  BMW roundel center caps shown in pictures are an additional purchase, are not pre-installed, and do not in any way imply any connection or affiliation between BMW and D-Force wheels.

The perfect track or street wheel for fitting wide rubber under your car. At just over 16lbs. each on 17" and 18 lbs for 18", you'll have a hard time finding a better performance wheel for the money. 41mm offset, flow-formed for superior strength, and fully tested for impact and crack resistance. Available in 3 sizes, and three finishes; silver, anthracite or black with machined lip. BMW roundel center caps are also available.

Available for 1992-2008 3-series and M3.


For 17" wheels, click here.

For 18" wheels, click here.
Ultimate Cup Holder

Fold-up design fits any size beverage.

click here to learn more!
The return of the quality "budget" sprung-hub flywheel...
The Stage 1 flywheel uses a standard-type E36 M3 pressure plate and the E34 M5 sprung hub disk.
fits these models: E46 1999-2005 330¹, 328, 325, 323
E36 1992-1999 M3, 328, 325, 323
Z3 - all models including M Roadster/Coupe
525i (1992-1995 E34)

¹ 5-speed models only

click here to learn more!
Caliper spreader

Designed specifically for fixed multi-piston calipers (Alcon, AP, Brembo, Rotora, Stoptech, Wilwood, etc.

click here to learn more!
Tow hooks for race use

FITS:

E46, E36, E30, Z3 (ALL MODELS)

click here to learn more!
Meyle HD rear shock tower mount

FITS:

E46, E36, E30, Z3 (ALL MODELS)

Improved rear shock tower mount is durable, quiet, and suitable for street or race use.

click here to learn more!

Urethane Subframe Mount - 
suitable for racing or performance street applications.

FITS:

E36 1992-1999 M3, 328, 325, 323, 318 (not 318ti)

High-durometer urethane bushings are stiff enough to provide nearly flex-free support, yet still absorb some amount of vibration.

Virtually eliminates flex and bushing separation from subframe torque forces (especially with high-powered cars).

click here to learn more!
Urethane rear trailing arm bushings (RTABs)
suitable for racing or performance street applications.

FITS:

E46 1999-2005 M3, 330, 328, 325, 323
E36 1992-1999 M3, 328, 325, 323, 318 (not 318ti)

Eliminatres "bump steer" effect caused by original rubber bushings and results in better rear suspension control, which improves cornering speeds and power delivery.

click here to learn more!
Urethane engine and transmission mounts 
suitable for racing or performance street applications.

FITS:

E46 1999-2005 M3, 330, 328, 325, 323
E36 1992-1999 M3, 328, 325, 323, 318
all Z3
all Z4

click here to learn more!
Ultimate OE-type replacement
brake rotors for BMW

Currently available for '92-'05 328, 325, 323, 318
(M3 and 330 coming soon!)

click here to learn more!


Passion. Creativity. State-of-the-art technology.

That’s just a small part of what goes into each and every BBS wheel. For more than 30 years, BBS has been producing award-winning, soundly engineered wheels for car enthusiasts the world over.

UUC is dedicated to an ultimate quality standard. We forge alliances with only the best companies.  BBS brings our racecars to the finish line.

click here for full BBS catalog for BMW
Racing brake systems engineered by UUC Motorwerks using Wilwood components starting at $1099.

Genuine forged caliper applications
with genuine floating rotors
for most '82-'07 3-series/M3 and Z3

NOW IN STOCK FOR E90

AVAILABLE in BLACK or RED

Suitable for racing or performance street applications.

click here to learn more!
Rasp-X GENERATION 2 now available!

This component is the most effective way to get rid of the M3's typical exhaust "rasp" sound.  

Due to the origination of this sound and the specific wave characteristics, the only way to sculpt and tune this sound is with a dramatic modification to the midpipe section.  No standard rear mufflers, regardless of manufacturer, will eliminate the sound.  It is only through the precise sound wave tuning of the UUC Rasp-X components that the undesirable sound is eliminated.

The result is a pleasing tone, slightly deeper than original, and without the raspy tone.  When used with any aftermarket rear muffler, the results are the same.

click here to learn more!
BMW High Performance Water Pump
The BMW High Performance Water Pump is a direct replacement pump designed to fit a wide range of BMW engines with no modifications. That includes accepting the Factory Fan Clutch.
Fits all M50/52/54 and S50/52 6 cylinder engines including -
  • E36 chassis 1992-1999 320,325,328, 323 and M3 - [3 series]
  • E46 chassis 1999-2005 320,323,325,328 &330 - [3 series]
  • E34 chassis 1990-1996 520 & 525 - [5 series]
  • E39 1999-2002 chassis 525 & 528 - [5 series]
  • X5 SAV 1999-2002 6 cylinder models
  • Z3 2.8 and 3.0 6 cylinder engines. - 2 door convertibles

    click here to learn more!
Adjustable camber/caster plates for all E46, E36, E30 incl. M3 models

OE-style bearing, no rattling! No change in ride height!

click here to learn more!
Urethane engine and transmission mounts 
suitable for racing or performance street applications.

FITS:

E46 1999-2005 M3, 330, 328, 325, 323
E36 1992-1999 M3, 328, 325, 323, 318
all Z3
all Z4

click here to learn more!
Direct-fit performance clutches for '92-'06 3-series and M3, '96-'04 5-series and M5, Z3, Z4

click here to learn more!
Lightweight flywheel and clutch package for E46 330i/Ci 6-speed

click here to learn more!
The Ultimate Chromoly Adjustable Rear Control Arms
Fits 1992-2005 318, 323, 325, 328, M3 (E36, E46) and 2003+ Z4
 (does not fit 318Ti & Z3)

Find out why UUC is the ULTIMATE choice!

click here to learn more!

Forgeline is committed to producing the highest quality street and competition wheels available today. All models feature a true forged center, and are not just machined from a forged disk.

Combining forged centers with forged rimshells produces some of the strongest competition wheels available today, turning aluminum into works of art. At Forgeline, "We forge the knowledge gained at the track into every wheel we produce." 

click here to learn more!
'99-'05 3-series Generation2 swaybars now shipping!

Click here to learn more!

The all-new RSC36 is the absolute best  "refined and sophisticated sounding" performance exhaust system for '92-'99 M3, 328, and 325.  It continues the fundamental design of UUC's System•U line as a full dual cat-back design, however the RSC36 is unique in that CORSA Performance was engaged to design and manufacture the exhaust. Thanks to this unique partnership, the RSC36 is available exclusively through UUC.

Click here to learn more!

The Original Clutch Stop

NEW! Version 3.0 with virtually unbreakable
urethane casting and stainless steel construction.

How can such a little item make gear shifts smoother?  How does this little device help you prevent missed shifts during spirited driving?

Click here to learn more!
Genuine Oakley Race footwear - three styles, three color combos!
  • Formula One FIA approved Professional Grade racing footwear of 100% engineered construction (most models)
  • Patented CarbonX® flame-resistant lining outperforms all known standards on the NFPA 2112 Flame Resistant Garments testing protocol
  • Self-extinguishing split suede with durable mudguard of synthetic leather
  • High-grip NBS vulcanized rubber outsole, optimized for tactile response on race pedals
  • Low-density advanced polymer EVA midsole for heel support and resilient shock absorption
  • CarbonX® batting and fire-retardant leather heel counter / inner sole for added protection

    click here for more info, options, and pricing
Stainless steel clutch lines - 
1992-1999 E36 3-series (all 6-cylinder) , E34 540i, 530i

Better clutch modulation and feedback - plastic-covered, direct-fit

click here for more info
race_pedals.jpg (79555 bytes)


(click to enlarge)		 BMW Aluminum RACE Pedals - manual transmission

Added pedal control with these UUC Motorwerks Aluminum pedals with heel-toe shifting extension and grippy raised edges.  Includes mounting hardware.  Available for manual transmission vehicles.

p/n AL-PED-BMW-RACE-MT

$129/set.  Fits E28, E30, E36, Z3, E46, E34.  Inquire about your model if not listed.

CLICK HERE TO ORDER
RK5 shift knob and matching e-brake handle

Our newest knob has a great new feature... the base extends down over the leather shift boot, covering the meeting point and giving a very modern, factory-styled appearance.

Matching e-brake handle has the same design - very unique!

click here for more info
Stainless steel brake lines - E36 3-series, E30 M3, E28 M5

Firmer pedal feel, better brake modulation, more durability - fully DOT-legal, plastic-covered, direct-fit for most E36 3-series application and others

click here for more info
3rd-generation Twin Silencer Exhaust (TSE3) for 1999-2004 BMW 3-series (330, 328, 325, 323 only)

TUNED AND MANUFACTURED EXCLUSIVELY FOR UUC MOTORWERKS BY CORSA PERFORMANCE

Our innovative Twin Silencer Exhaust combines maximum performance, great looks, and an awesome "Italian racecar" sound... all at a very civilized volume level, practically no drone at cruising speed.  

click here for mre info
Double Shear Selector Rod  (DSSR)

Eliminate slop and loose shifter movement from worn selector joint and shifter lower pivot.

click here for more info
All-new EVO3 Ultimate Short Shifters for all models

UUC's years of shifter experience and continual development have resulted in a major upgrade to our product, the all-new EVO3.

What's new with EVO3?  Everything.  click here for more info
Strut bar for E46 330, 328, 325, 323 (1999-2004)

The only ultralight magnesium strut bar for the BMW 3-series features pivot-free design, CNC-precise manufacturing, and two color choices.

click here for more info and pics
Lightweight flywheel for E46 M3

UUC is proud to announce the World's First sprung-hub clutch setup for the E46 M3.  Our complete package includes the lightweight flywheel, complete sprung-hub clutch kit based on the M5 clutch conversion.

Click here for more info and pics


"Stage II" lightweight flywheel for '92-'99 E36 3-series

Exclusive "sprung hub" clutch design virtually eliminates flywheel chatter with our 8.5lb flywheel.  Uses original BMW M5 clutch components for easy and affordable replacement.

European Car magazine "Select Gear Top 10 Products of 2003" winner!

click here for more info
"Generation 2" lightweight flywheel for '99-'04 E46 323/325/328/330 5-speed

Exclusive "sprung hub" clutch design virtually eliminates flywheel chatter with our 12.5lb flywheel.  Uses original BMW clutch components or UUC's carbon/kevlar clutch for easy and affordable replacement.

click here for more info
UUC Baseball Caps back in stock - new color!

click here for more info and pics
E46 M3 SwayBarbarian

UUC's "Ultimate" design philosophy extends to our new tubular chrome moly swaybars for all 2001-2003 E46 M3s.

click here for more info
Underdrive Pulleys for '92-'04 3-series (M3/330/328/325/323 models)

Gain back that lost horsepower!

click here for more info
Copyright (c) 2003 - 2006 Chiba Technologies, Inc.  All rights reserved.