Our
latest version of our clutch stop (The "Big Boy V3.0), is now a
virtually unbreakable urethane casting with stainless steel mounting
bolt.
Since the clutch arm
on most late model BMWs are made from plastic (and have very poor
fitting clutch arm bushings), the clutch arm tends to move laterally a
bit, allowing the clutch arm to slip a smaller diameter stop. With
the enlarged surface area of the The Big Boy V3.0, this is no longer an
issue! Even with the sloppiest of clutch arms, the larger diameter
will not let the clutch arm past.
The
Big Boy uses a stainless steel M10 threaded post which is permanently attached to the
metallic base. A black urethane surface is then bonded to the
metallic base.
The
assembly is completed with a stainless steel washer
and jam nut, which are used to allow for setting the appropriate setting of the
clutch stop.