BMW CATALOG / Brake rotors, parts & upgrades / stainless steel brake lines

"Performance tune" your braking system.  

  

Stainless steel brake lines for improved braking performance 100% MADE IN USA and DOT-COMPLIANT

Original brake lines are rubber and can expand under the normal pressure of use.  This expansion of the brake line negatively affects the brake caliper piston travel, and makes for mushy pedal feedback.

UUC's Stainless Steel Brake lines are used to "performance tune" your braking system.  

Inner Teflon® line is covered with woven stainless steel braid that will not expand under pressure.  The advantages include better brake pedal feedback and a firmer pedal, along with superior brake modulation.  Results will be immediate.

Click here for Application Guide & Ordering

Technical features:

• fully compliant with DOT Standards (MVSS-1006)
  
  
• lines burst-tested to 6000psi
  (maximum tested pressure from a BMW braking system is 1200psi)
  
  
• Teflon® inner line covered with a woven layer of stainless steel
  and covered in an abrasion-resistant material (translucent blue plastic covering).
  
  
• plastic end pieces protect assembly, no exposed steel fibers to stick fingers.

UUC recommends: RBF 600 BRAKE FLUID (click for more details)

Professional installation recommended.  
Installer responsible for correct fitting and bleeding procedure as recommended by BMW.  
As brake line installation is a safety-related item, installer assumes all
responsibilities and risks associated with brake line replacement.

6-line system fits most E36, available for other models.

4-line system for E46 3-series & M3

4-line system for E30 M3

fully DOT-compliant

steel weave covered in abrasion-resistant translucent blue cover

© 2004-2009 UUC Motorwerks