Performance Exhaust for 1992-1999 E36 3-series and M3
featuring Reflective Sound-Cancellation™ (RSC™) technology from Corsa Performance

f
its 1992-1999 M3, 328i/is, 325i/is models only


The Ultimate in sound and performance

[ click here for pricing and to order. ]

READ THE REVIEW ON BIMMERFEST.COM - [ CLICK HERE ]

The all-new RSC36 is the absolute best "refined and sophisticated sounding" performance exhaust system for '92-'99 M3, 328, and 325.  CORSA Performance was engaged to design and manufacture the exhaust. Thanks to this unique partnership, the RSC36 is available exclusively through UUC.


CORSA is one of the largest automotive and high-end marine exhaust tuning companies in the USA with engineering and manufacturing facilities in Ohio and a patented, proprietary technology called Reflective Sound Cancellation™. CORSA consults to General Motors, Ford and Daimler-Chrysler and carries the title of "official licensed product" on its GM aftermarket exhaust systems.

The result of CORSA's extensive research and development on the BMW 3 Series is the new dronefree RSC™ exhaust system, delivering a pleasant sound at idle and cruise, and a muscular roar at high rpm. CORSA tuned this system specifically to counter drone. Sound pressure waves are reflected within the muffler case and unwanted noise frequencies are cancelled through patented* Refective Sound Cancellation™ technology. The result is a tuned muffler that produces the best sound and performance possible.


VIDEO and SOUND

(right-click the links and select "Save Target As..." to save file to your PC):

1: [ EXTERIOR: start-up, throttle rev in neutral, fast acceleration away ] 11.9MB

2: [ EXTERIOR: slow acceleration toward camera ] 8.29MB

3: [ EXTERIOR: fast acceleration toward camera ] 6.2MB

4: [ EXTERIOR: cruising past camera ] 7.2MB

The CORSA Distinction
No Other Exhaust Manufacturer
Delivers All Three:

1] No Resonance/Drone... due to our patented Reflective Sound Cancellation™ (RSC™) technology; your exhaust is whisper quiet at highway speeds.

2] Increased Horsepower and Torque... resulting from a straight-through design; increased flow and less backpressure.

3] Great Performance Sound... we tune in the good sounds and cancel the bad, without the use of baffles or steel wool packing material.

How does it work?

Reflective Sound-Cancellation™ (RSC™) -
a non-electrical noise control system without the complication of incorporating the use of electronics or speakers. Essentially, engine sound (pressure) waves are reflected in passages inside the muffler to cancel out unwanted sound waves. The result is a "tuned" muffler that "cleans up" the noise without eliminating the pure sound of power associated with a high-performance vehicle. Using this Corsa technology, the stainless steel Corsa Performance line of mufflers are tuned to eliminate passenger cabin resonance and produce just the "right" sound. 

Click here for more technical details on RSC™
.

The Corsa Performance muffler design does not use conventional packing materials, and provides a totally un-restrictive exhaust flow for maximum power output.

Features:

  • Straight-through, nonrestrictive design specifically tuned for the E36 3 series, increases exhaust flow.
  • Flow bench-tested 37% gain in exhaust flow vs. stock system.
  • Patented* CORSA Reflective Sound Cancellation™ (RSC™) technology for superior sound.
  • 100% T-304 stainless steel construction, crafted with pride and precision in the USA.
  • Twin 2.25" pipes; Twin RSC™ mufflers.
  • Dual rear exit with handcrafted twin 3.0" Pro-Series tips.
  • Substantially lighter than the original exhaust section removed.
  • More ground clearance.
  • 100% mandrel-bent pipes, TIG-welded seams
  • True bolt-on installation; no cutting or welding required.
  • 50-state emissions legal.

But there's even more that makes the UUC RSC36 special:

ATTENTION TO DETAIL
tips_staggered.jpg (23761 bytes)
UUC RSC36 tips are
staggered to follow valance line
 resulting a pleasing appearance. 

This shows a muffler system designed
specifically for this application.
Typical aftermarket exhaust has
tips that are even, and do not line
up with valance.  

This shows a generic muffler  used
in the application.



click any image for a larger view:


RSC_CUTAWAY.jpg (48979 bytes)

tips2.JPG (122542 bytes)

tips1.JPG (63838 bytes)

online review:





welds1.jpg (198792 bytes)

welds2.jpg (168825 bytes)