Transmission Mounts - Racing version (TMRACE)

Purchase Transmission Mounts - Racing version (TMRACE)

Transmission Mount - Racing version

This part is intended for race cars only and is not recommended for street car use.

To meet the demanding needs of racers, the new TM-R features a hybrid design sharing features of our standard TME bushings and solid metal racing mounts:

• High-durometer urethane bushings are stiff enough to provide nearly flex-free support, yet still absorb some amount of vibration.
  
  

• Continuous bolt-through design eliminates flex and bushing separation from rotational forces (especially with high-powered cars).
  
  

• Direct-fit design with correct clearance notch ensures hassle-free installation on any 1992-2005 3-series or M3.
  
  

• Stainless steel hardware.

How is this different from the standard UUC Transmission Mount?

The standard BMW bushings and the standard UUC bushings do not have a continuous bolt. Despite appearances, those bushings actually have two separate threaded rods within the bushing material. While this is an ideal design for a street car, a race car has different requirements. Noise and vibration isolation are not race car priorities and are happily swapped in favor of a stiffer and stronger design.

The TM-R meets these requirements with a stiff urethane and strong single bolt that will not allow the bushing to pull apart or break, regardless of how much powertrain torque is applied.

Copyright © 2005 Chiba Technologies, Inc. All rights reserved.

Purchase Transmission Mounts - Racing version (TMRACE)